Re: 04W.MAWAR
Posted by hanna on 6/1/2012, 7:35 pm
Thanks.  Here is what the Japan Meteorological Agency says.

TS 1203 (MAWAR) Issued at 21:50 UTC, 1 June 2012

Analyses at 01/21 UTC>
Scale -
Intensity -
Center position N16°05'(16.1°)
E124°35'(124.6°)
Direction and speed of movement NNW 10km/h(6kt)
Central pressure 996hPa
Maximum wind speed near the center 20m/s(40kt)
Maximum wind gust speed 30m/s(60kt)
Area of 30kt winds or more ALL190km(100NM)

<Forecast for 02/09 UTC>
Intensity -
Center position of probability circle N17°10'(17.2°)
E124°30'(124.5°)
Direction and speed of movement N 10km/h(6kt)
Central pressure 990hPa
Maximum wind speed near the center 23m/s(45kt)
Maximum wind gust speed 35m/s(65kt)
Radius of probability circle 90km(50NM)

<Forecast for 02/21 UTC>
Intensity -
Center position of probability circle N18°00'(18.0°)
E124°40'(124.7°)
Direction and speed of movement N Slowly
Central pressure 985hPa
Maximum wind speed near the center 30m/s(55kt)
Maximum wind gust speed 40m/s(80kt)
Radius of probability circle 160km(85NM)
Storm warning area ALL220km(120NM)

<Forecast for 03/18 UTC>
Intensity -
Center position of probability circle N19°25'(19.4°)
E125°35'(125.6°)
Direction and speed of movement NNE 10km/h(6kt)
Central pressure 975hPa
Maximum wind speed near the center 30m/s(60kt)
Maximum wind gust speed 45m/s(85kt)
Radius of probability circle 300km(160NM)
Storm warning area ALL390km(210NM)

<Forecast for 04/18 UTC>
Intensity Strong
Center position of probability circle N22°30'(22.5°)
E127°50'(127.8°)
Direction and speed of movement NNE 15km/h(9kt)
Central pressure 965hPa
Maximum wind speed near the center 35m/s(70kt)
Maximum wind gust speed 50m/s(100kt)
Radius of probability circle 410km(220NM)
Storm warning area ALL540km(290NM)


http://www.jma.go.jp/en/typh/

38
In this thread:
04W.MAWAR - hanna, 6/1/2012, 12:38 pm
  • Re: 04W.MAWAR - cypresstx, 6/1/2012, 2:45 pm
    • Re: 04W.MAWAR - hanna, 6/1/2012, 7:35 pm
< Return to the front page of the: message board | monthly archive this page is in
Post A Reply
This thread has been archived and can no longer receive replies.